DESCRIPTION OF JOB TASK AND RESPONSIBILITIES:
Inspect body and frame damage to determine feasibility and best method of repair and painting.
Prepare vehicles surfaces for painting, sand body areas to be painted, and cover bumpers, windows, and trim with masking tape or paper to protect them from the paint.
Remove old patient and rust by scraping, grinding, sanding and brushing or applying paint remover.
Apply neutralizing and chemical conditioning solutions to bare metal surfaces.
Follow supervisor’s instructions as to which parts to restore or replace and how much time the job should take.
Locate surface irregularities with pile, light or hand.
Repair locks, latches, remote control window regulators, window channels and wooden body parts.
Remove, install adjust and align body components, such fenders, doors, door panels, hoods, deck lids, grills, bumpers, roofs and quarter panels.
Removes and replaces weather and chapping strips.
Remove glazed, cracked or broken safety glass.
Cuts laminated safety glass using patterns, cutters, pliers, electric resistant wire and plastic cutting knife.
Grinds, levels and smoothens edges of glass using a glass edging machine.
Install glass in bodies and doors.
Replace curved surface glass with factory replacements
Mix polyester resins and hardeners to be used in restoring damaged areas
Chain or clamp frames and sections to alignment machines that use hydraulic pressure to align damaged components.
Fit and weld replacement parts into place, using wrenches and welding equipment and grind down welds to smooth them, using power grinders and other tools.
Position dolly blocks against surfaces of dented areas and beat opposite surfaces to remove dents, using hammers.
Remove damaged panels and identify the family and properties of the plastic used on a vehicle.
Apply body filler to build up depressed areas.
Smooth filled areas until uniform in contour with adjoining areas.
Must work in a safe manner and ensure minimum loss or breakage of tools under control.
Clean work areas, using air hoses, to remove damaged material and discarded fiberglass strips used in repair procedures.
Perform other related duties as may be assigned by supervisor, body & fender.
BASIC JOB QUALIFICATIONS:
Must speak, read and understand English language.
Must pass overseas medical screening and be in good health.
Must have a valid country Driver’s License
JOB SPECIFICATIONS: SPECIAL CERTIFICATIONS OR TRAINING:
NONE
EDUCATION:
Completion of High School with courses in shop mathematics, metal working, electrical or mechanical drawing is desirable.
EXPERIENCE:
A minimum of 3 years’ experience in automotive body and fender work is required.
Knowledge of the characteristics of materials.
Metal repair and fabrication by oxyacetylene, metallic arc, inert gas-shield arc on forging processes.
Metal heat-treating.
Principles of welding and forging.
Use and capacity of welding equipment.
Shop drawing and mathematics.
Metal measurement and layout devices.
Safety codes and practices regarding explosive gases and hazardous rays are mandatory.
Basic terms of the job offer.
Assignment Duration: 12 months. Renewal subject to performance and project status.
Base Monthly Salary: 48 hours per week minimum work requirement: $ 570 (based on 48 hr. work week requirement)
Working schedule: 48 hours per week (8 hours per day/6 days a week)
Payroll period: Monthly. Amount give take home.
Overtime: Work more than 8 hours per day or work performed on a rest day and/or holiday, will be paid as overtime at the base salary rate.
Accommodations: Housing, transportation, meals in-country, and laundry facilities are provided
Sick Leave: Employee will accrue 2.67 hours of sick leave for each full month of service, beginning with the completion of the first full month of Foreign Service employment.
Annual leave Up to 21 days paid at the end of each 12-month contract.
Travel will be provided by the employer to the employee’s home country.
Other requirements
Your Passport must be valid for at least 12 months, with at least 6 total blank visa pages remaining.
Your driver’s license must be valid for at least 6 months (unless processing for a CDL-required position, which will require 12 months remaining).
Updated covid and yellow fever vaccination certificate.
Apply via :
talcl.com
